आईएसएसएन: 2155-952X

जैवप्रौद्योगिकी एवं जैवसामग्री

खुला एक्सेस

हमारा समूह 1000 से अधिक वैज्ञानिक सोसायटी के सहयोग से हर साल संयुक्त राज्य अमेरिका, यूरोप और एशिया में 3000+ वैश्विक सम्मेलन श्रृंखला कार्यक्रम आयोजित करता है और 700+ ओपन एक्सेस जर्नल प्रकाशित करता है जिसमें 50000 से अधिक प्रतिष्ठित व्यक्तित्व, प्रतिष्ठित वैज्ञानिक संपादकीय बोर्ड के सदस्यों के रूप में शामिल होते हैं।

ओपन एक्सेस जर्नल्स को अधिक पाठक और उद्धरण मिल रहे हैं
700 जर्नल और 15,000,000 पाठक प्रत्येक जर्नल को 25,000+ पाठक मिल रहे हैं

में अनुक्रमित
  • सूचकांक कॉपरनिकस
  • गूगल ज्ञानी
  • शेरपा रोमियो
  • जे गेट खोलो
  • जेनेमिक्स जर्नलसीक
  • शैक्षणिक कुंजी
  • अनुसंधान बाइबिल
  • चीन राष्ट्रीय ज्ञान अवसंरचना (सीएनकेआई)
  • कृषि में वैश्विक ऑनलाइन अनुसंधान तक पहुंच (अगोरा)
  • इलेक्ट्रॉनिक जर्नल्स लाइब्रेरी
  • RefSeek
  • हमदर्द विश्वविद्यालय
  • ईबीएससीओ एज़
  • ओसीएलसी- वर्ल्डकैट
  • एसडब्ल्यूबी ऑनलाइन कैटलॉग
  • जीव विज्ञान की वर्चुअल लाइब्रेरी (विफैबियो)
  • पबलोन्स
  • चिकित्सा शिक्षा और अनुसंधान के लिए जिनेवा फाउंडेशन
  • यूरो पब
  • आईसीएमजेई
इस पृष्ठ को साझा करें

अमूर्त

Novel Approaches to avoid Microbial Adhesion onto Biomaterials

Lígia R. Rodrigues

Infections resulting from microbial adhesion to biomaterial surfaces have been observed on nearly all medical devices with severe economic and medical consequences [1]. Biofilm infections, mainly due to their antimicrobial resistance, pose a number of clinical challenges, including disease, chronic inflammation, and rapidly acquired antibiotic resistance. Independently of the superiority of the implant, virtually all medical devices are prone to microbial colonization and infection. Examples of such devices include prosthetic heart valves, orthopaedic implants, intravascular catheters, artificial hearts, left ventricular assist devices, cardiac pacemakers, vascular prostheses, cerebrospinal fluid shunts, urinary catheters, voice prostheses, ocular prostheses and contact lenses, and intrauterine contraceptive devices. A large amount of research to eliminate or reduce infections by developing anti-infective and anti-adhesive devices has been encouraged as a result of the significant resistance of biofilms to conventional antibiotic therapies. These improved devices may be produced by either mechanical design alternatives; physicochemical modification of the biomaterial surface (e.g. biosurfactants, plasma, atom transfer radical polymerization, brushes); anti-infective agents bound to the surface of the material (e.g. biosurfactants, silver, quaternary ammonium compounds, synthetic antibiotics); or release of toxic agents into the adjacent surroundings (e.g. chlorhexidine, antibiotics) [2,3]. The success of the mechanical design alternatives has been residual and with limited applicability [2]. Furthermore, the effectiveness of coatings designed to reduce adhesion by modification of the surface properties has also been reduced and greatly dependent on the bacterial species. Surfaces modified with poly(ethylene glycol) [4], poly(ethylene oxide) brushes [5], and hydrophilic polyurethanes [6], among many others, have been reported. Additionally, surface-bounded anti-infective agents are only toxic to the initial wave of incoming bacteria and provide little residual effects once layers of dead cells accumulate, which are also inflammatory.